IBM Power 8 Fibre Channel card

8286 EN0A: PCIe3 16 Gb 2-port Fibre Channel Adapter (CCIN 577F)

EN0A is IBM's PCIe3 16 Gb 2-port Fibre Channel Adapter (CCIN 577F). Listed for 8286-41A, 8286-42A, 8247-42L.

A two-port 16 Gb Fibre Channel card for the 4U Power S814 and S824 that connects to SAN storage.

REDP-5097 and REDP-5102 call it PCIe2 and list Linux only; the IBM adapter manual calls it PCIe3, and the IBM i support page later adds native IBM i support.

REDP-5102 also lists EN0A for the S822, where full height cards go in the PCIe Gen3 I/O drawer. Replaced on Power9 by EN2A.

Before you order EN0A

Fibre Channel cards connect the server to a storage network (SAN) or tape. Low profile cards fit the shorter 2U servers. Full height cards fit the taller 4U servers. If a card has a twin code, the twin is the same card in the other height.

Not sure which Power 8 you have? The Identify Your Power 8 page shows how to check. Collecting several parts for one quote? Use the Power 8 maintenance and sourcing vendor directory. Or look up another feature code.

Source: p8hcd Table 7 and FC EN0A topic; IBM i I/O Support Details. Always confirm against your server's own configuration before you order.

Specifications

AttributeDetail
Feature CodeEN0A
DescriptionPCIe3 16 Gb 2-port Fibre Channel Adapter (CCIN 577F)
Part TypeFibre Channel card
FRU Part Number00E3496
Ports2
Speed16 Gb (switch attach at 4, 8 or 16 Gb; direct attach at 16 Gb only)
PCIePCIe3 x8
Form Factorshort, full height
OpticsSFP+ SR, LC connectors
Npivthrough VIOS
CCIN577F
FRU00E3496
Applies To8286-41A, 8286-42A, 8247-42L
IBM i SupportedYes ... IBM i 7.2 TR2 and 7.1 TR10 added native direct attach; VIOS configurations were supported earlier.

Feature code details come from IBM Redbooks, IBM Documentation, IBM Support pages, and the Midland Information Systems parts catalog. Always confirm against your server's own configuration before you order.